top of page
Diamond Abrasive Products.png

Đĩa kim cương dẻo Roloc Snail-Lock

Snail-Lock Flexible Diamond Disc

Đĩa kim cương linh hoạt Snail-Lock được thiết kế đặc biệt cho máy đánh bóng cạnh tự động một đầu hoặc nhiều đầu để đánh bóng cạnh thẳng và vát. Nó chỉ yêu cầu tối đa 3000 grit để đánh bóng các cạnh thành công. Các nhà chế tạo sẽ thấy rằng kết quả rất nhất quán và có thể dựa vào hiệu suất chất lượng cao. Tận dụng bộ chuyển đổi khóa ốc thông dụng, miếng SL sẽ dễ dàng gắn vào máy móc đánh bóng cạnh. Các miếng đệm chỉ cần lắp vào vị trí và khóa lại bằng một chuyển động xoắn. Để loại bỏ các miếng đệm chỉ cần tháo xoắn và loại bỏ, sau đó thay thế bằng đá mài tiếp theo. Thiết kế "xoắn và khóa" giúp tiết kiệm thời gian và tăng năng suất.

Đĩa kim cương linh hoạt Roloc

cung cấp một bề mặt không có gờ thích hợp để sơn hoặc phủ. Các đĩa này có thể được sử dụng để loại bỏ gỉ nhẹ, oxit và lớp phủ. Đĩa nhiệm vụ nặng để loại bỏ mối hàn, mài và pha trộn các khu vực lớn và nhỏ của bề mặt kim loại. Có sẵn ở dạng phát hành thường xuyên và nhanh chóng Dùng cho vật liệu khó mài, đá, thủy tinh, gốm, kim loại, cacbua, vật liệu tổng hợp. Kim loại mạ liên kết cố định một cách chắc chắn những viên kim cương đã được phân loại micromet vào lớp nền. Dùng để mài phẳng, mài cạnh, mài đường viền và đánh bóng. Chịu được lực nặng, chống nước, lớp nền polyester.


  1. Material Removal Rate: Snail-Lock Flexible Diamond Discs are designed for efficient material removal. The rate at which they remove material, whether it's concrete, stone, or other hard surfaces, can be quite high. This makes them effective for tasks like grinding, shaping, and removing imperfections.

  2. Surface Finish: The performance of these discs can vary based on their grit size. Coarser grits are used for aggressive material removal and can leave a rough surface texture, while finer grits are used for polishing and achieving a smooth, glossy finish. The choice of grit size can significantly impact the final surface appearance.

  3. Flexibility: These discs are known for their flexibility, which allows them to conform to the contours of the surface being worked on. This feature is particularly useful when dealing with uneven or curved surfaces.

  4. Diamond Abrasives: Snail-Lock Flexible Diamond Discs are embedded with diamond abrasive particles. Diamond is one of the hardest materials on Earth, making it highly effective for cutting, grinding, and polishing hard materials like stone and concrete. The quality and concentration of diamond abrasives on the disc can affect its performance.

  5. Longevity: The lifespan of these discs can vary depending on the quality of the disc and the hardness of the material being worked on. Proper care and maintenance, such as cleaning the disc and using it at the appropriate speed and pressure, can extend its life.

  6. Speed and Efficiency: When used correctly, these discs are designed to work efficiently and provide consistent performance. They can reduce the time and effort required to complete tasks compared to traditional abrasive tools.

  7. Attachment System: Snail-Lock Flexible Diamond Discs are specifically designed for use with the Snail-Lock attachment system, which allows for quick and easy disc changes on certain grinding machines. The performance of the attachment system can impact the overall performance of the disc.

Grit Range

The grit size of diamond discs determines their level of coarseness or fineness, with lower numbers representing coarser grits and higher numbers representing finer grits. The choice of grit size depends on the specific application and the desired surface finish. Common grit sizes for Snail-Lock Flexible Diamond Discs include:

  1. 30 grit

  2. 50 grit

  3. 100 grit

  4. 200 grit

  5. 400 grit

  6. 800 grit

  7. 1500 grit

  8. 3000 grit

Again, the availability of grit sizes may vary based on the manufacturer and the specific product line. When selecting a grit size, consider the material you are working on and the finish you want to achieve. Coarser grits are typically used for initial material removal and shaping, while finer grits are used for polishing and achieving a smoother surface.


  1. Grinding: These discs are used for coarse grinding of stone and concrete surfaces. They are effective at removing unevenness, stains, coatings, and imperfections from the surface. Grinding is often the first step in surface preparation for various projects, including flooring installation or restoration.

  2. Polishing: Snail-Lock Flexible Diamond Discs are employed for polishing stone and concrete surfaces to achieve a smooth, glossy, or reflective finish. This is especially important for high-end architectural and decorative concrete work.

  3. Shaping: These discs can also be used for shaping edges, corners, or specific details on stone and concrete materials. They allow for precision work in sculpting and shaping surfaces to meet specific design requirements.

  4. Concrete and Stone Restoration: In restoration projects, these discs are valuable for rejuvenating old and worn surfaces. They can help remove damage, stains, or weathering, bringing the material back to its original or desired condition.

  5. Material Removal: Snail-Lock Flexible Diamond Discs can be used to remove excess material, such as excess concrete or mortar, to achieve the desired surface texture or level.

  6. Edge Profiling: They are suitable for edge profiling tasks, such as rounding or beveling edges of countertops, stairs, or architectural elements.

  7. Exposing Aggregate: In polished concrete projects, these discs are used to expose the aggregate (small stones or other decorative elements) within the concrete, creating a unique and visually appealing surface.

  8. Coating Removal: Snail-Lock discs are efficient at removing various coatings, including paint, epoxy, adhesive residue, and sealants, from concrete and stone surfaces.


The diameter and grit size options for Snail-Lock Flexible Diamond Discs can vary depending on the manufacturer and the specific product line. However, here are some common diameter and grit size options that you may encounter:

  1. Diameter Options:

  2. 4 inches (100 mm)

  3. 4.5 inches (115 mm)

  4. 5 inches (125 mm)

  5. 6 inches (150 mm)

  6. 7 inches (180 mm)

  7. Customized:customized to meet specific size requirements based on your particular needs and applications. Customized sizes offer the flexibility to adapt to various projects and surfaces. Whether you require smaller sheets for precision work or larger sheets for more extensive tasks, Our factory can often accommodate your requests for diamond sandpaper sheets in the size that best suits your requirements. When ordering customized sizes, be sure to provide the dimensions and quantity needed to ensure you receive the tailored product you require.

How to Buy

Request an Equipment  Quote
Ready to buy stuff from Flexible,Request a quote now.
Become a Delare
Becoming a Flexbile Authorized Dealer
Browse Parts and equpments on our store
Flexbile solutions to help you tackle any challenge


Bình luận

Share Your ThoughtsBe the first to write a comment.


Q: What are the advantages of a flap wheel?

Advantages. The advantages of a flapwheel over a traditional disk are twofold: The separate flaps each attack the workpiece surface at a slightly different angle, and this varies slightly with tool angle. This avoids the common problem with flat sheets, where they produce repeated identical scratches.

Q: What is the difference between flap wheel and grinding wheel?

Flap discs are ideal for grinding, blending, finishing, and polishing surfaces, as well as removing rust, paint, and weld seams. Grinding discs are typically used for heavy-duty material removal, such as removing large welds, and shaping and smoothing metal edges.

Q: What is the best flap disc for grinding welds?

Flap discs are good for removing heavy weld seams and excess material while providing a long service life: For general use, the recommendation is a 60-grit ceramic flap disc. For greater speed and stock removal, a Type 29 conical is the best choice.

Q: What is a flap disc grinding wheel used for?

A flap disc is an abrasive product used to contour and shape metal. It consists of overlapping abrasive flaps glued to a backing plate and is regularly used for welding, machining, heavy-duty equipment work, and industrial maintenance. Common applications include: Cleaning flash from molds and castings.

Q: What is the best grit for flap discs?

Deburring and deflashing: 60 grit abrasive grain is ideal for deburring and deflashing work. Rust removal and blending: Abrasive grit in the more expansive range from 60 to 80 is optimal for finer work like rust removal and blending.

Q: Which grit flap disc would leave the smoothest finish on metal?

For finishing and sanding metal, a 120-grit flap disc could be your best option. Flat head flap discs best suit the purpose of finishing metal.

Q: What is the best flap wheel for stainless steel?

Designed for both mild and stainless steel, flap wheels made from zirconia (or zirconium) abrasive ribbon (blue / green in colour) are ideal for use on most metals including stainless steel. Other flap discs on the market made from using aluminium oxide abrasive ribbon are not suitable for use on stainless steel.

Q: Can you put a flap disc on a bench grinder?

Unmounted large flap wheels can conform to most shapes and are especially effective on pipes, tubes and other cylindrical items and are designed to be used on a bench grinder, pedestal grinder, or straight finishing tool with a 1 inch arbor.

bottom of page